94-V1 Fireproof Wadding

【Raw Mateirals】：

94V fireproof fiber

【Specifications】：

60~3000gsm as per yours

【Color】：

white

【Item No.】：

12C02

【Tech.】：

Open and mix fiber together,and by needle punch tech. or thermal bonded tech.

【Applications】：

Furniture for private purposes such as indoors and other dwellings (including caravans), such as sofas, beds, children's furniture, cushions, high chairs, mattresses (any size) and pillows, carpets, etc.

【Package】：

Roll vacuumed package with PE bag inside and knitted bag outside

【Our purpose】：

Honest and trustworthy, excellent quality, customer first, win-win cooperation

【Product knowledge】：

UL94
There are five kinds of tests:
1. Level B horizontal combustion test
2. Vertical combustion test of 94V-0, 94V-1, 94V-2
3. 94 5-V vertical combustion test
4. Flame spread index test with radiant panel (measured according to ASTM E 162 standard, not introduced here)
5.94VTM-0, 94VTM-1, 94VTM-2 level vertical combustion test (VTM refers to extremely thin materials not introduced here) are described as follows:
1. 94HB level horizontal combustion test method
This test uses a small strip specimen with a length of 127mm, a width of 12.7mm, a maximum thickness of 12.7mm, and a minimum thickness of 3.05mm. Carried out in an unventilated inspection box. For materials rated as 94HB, when the sample thickness is 12.7mm, the burning speed on the 76.2mm gauge length is not more than 38.1mm/min, or when the sample thickness is less than 3.05mm, the burning speed is not more than 38.1mm/min or Before reaching the 102mm mark, the burning must be stopped. 

2. 94V-0, 94V-1, 94V-2 level vertical combustion test method
According to the vertical burning test in UL94, the polymer material is classified as V-2, V-1, V-0 and 5-V according to the test results of the burning time of the sample and whether the droplet ignites the absorbent cotton, among which V-2 Grade is the lowest flame-retardant grade, and 5-V is the highest flame-retardant grade. First introduction
94V-0, 94V-1, 94V-2 level test methods. The test sample is 127mm long, 12.7mm wide, and the maximum thickness is 12.7mm. Carried out in a non-ventilated test chamber. The upper end of the sample (6.4mm square) is clamped with the fixture on the bracket, and the longitudinal axis of the sample is vertical. The lower end of the sample is 9.5mm from the lamp nozzle and 305mm from the surface of the dry absorbent cotton. Ignite the Bunsen burner and adjust it to produce a 19mm high blue flame, place the Bunsen burner flame at the lower end of the sample, ignite for 10 seconds, then remove the flame (at least 152mm away from the sample), and note that the sample has a flame Burning time. If the flame of the sample is extinguished within 30s after the flame is removed, the Bunsen burner must be moved under the sample again, the sample should be ignited again for 10 seconds, and then the Bunsen burner flame should be removed again, and the flaming combustion of the sample should be noted. And the afterburning time of flameless combustion. If the sample is dripping with smoke, let it fall on the absorbent cotton 305mm under the sample to see if it ignites the absorbent cotton. If absorbent cotton catches fire, its factors should be considered when grading.

【Features】：

You can choose softness and hardness at will, with good tensile strength, good resilience, light weight, softness, comfort, not easy to change after washing, strong warmth retention, and strong fire resistance.

【Certificates】：

ROHS,REACH,MSDS,SGS,ISO,BS5852 etc.